Trev meeting with Evannex Jan. 2017

TrevP

TOO Founder / Administrator
Founder
Joined
Mar 1, 2016
Messages
6,546
Location
Toronto
Tesla Owner
Model X
Country
Country
#3
IMG_2920.JPG IMG_2913.JPG IMG_2916.JPG These guys are super awesome. Took my wife and I out for breakfast and gave us a tour of their shop. I have the important stuff on video so I'll do one when I get back.

They also presented me with the very first signed and framed Tesla Model 3 "blueprint" print they will be selling in the near future!! They also gave me an ultra rare Model X Hotwheels car not available in North America (yet) !

Anyhow we're are going to be working together to bring our members some really great products for Model 3 when it arrives.
 
Last edited:

Rick59

Top-Contributor
Joined
Jul 20, 2016
Messages
547
Location
Ottawa, Ontario, Canada
Tesla Owner
Model X
Country
Country
#5
Here's the Model ☰ blueprint poster and in t-shirt form on EVAnnex's site
Assuming we have the Carbon Fibre interior option from Tesla, I likely will be adding some exterior CF that I'm sure EVAnnex will be adding for the Model ☰.
Their first priority should be license plate brackets so Tesla doesn't have to drill holes to attach the plate holder.
 

MichelT3

Love those Aero's!
Moderator
TOO Supporting Member
Joined
Nov 16, 2016
Messages
1,372
Location
Netherlands
Tesla Owner
Model 3
Country
Country
#6
Their first priority should be license plate brackets so Tesla doesn't have to drill holes to attach the plate holder.
For the front plate I would love to put on a plate in the form of a plastic sticker. Which is not official, but allowed in my country. To keep the aerodynamic flow as optimal as possible.
 

Steve C

Well-Known Member
TOO Supporting Member
Joined
Sep 28, 2016
Messages
370
Location
Toronto
Country
Country
#8
For the front plate I would love to put on a plate in the form of a plastic sticker. Which is not official, but allowed in my country. To keep the aerodynamic flow as optimal as possible.
You would like to think any local law enforcement would give you a wave considering you went out of your way to make it as proper as possible. As long as the front matches the back of course ;)
 

MichelT3

Love those Aero's!
Moderator
TOO Supporting Member
Joined
Nov 16, 2016
Messages
1,372
Location
Netherlands
Tesla Owner
Model 3
Country
Country
#9
Yes they will. I have a similar solution on a classic car. As long as you have an official plate in the car.
Of course front and back should match...
 

Steve C

Well-Known Member
TOO Supporting Member
Joined
Sep 28, 2016
Messages
370
Location
Toronto
Country
Country
#10
Yes they will. I have a similar solution on a classic car. As long as you have an official plate in the car.
Of course front and back should match...
That would depend on the young officer pulling you over and the 'attitude test'.
 

Red Sage

The Cybernetic Samurai
Joined
Dec 3, 2016
Messages
714
Location
Los Angeles CA
Country
Country
#13
View attachment 928 View attachment 929 View attachment 930 These guys are super awesome. Took my wife and out for breakfast and gave us a tour of their shop. I have the important stuff on video so I'll do one when I get back.

They also presented me with the very first signed and framed Tesla Model 3 "blueprint" print they will be selling in the near future!! They also have me an ultra rare Model X Hotwheels car not available in North America (yet) !

Anyhow we're are going to be working together to bring our members some really great products for Model 3 when it arrives.
I have always been a sucker for that type of inverted Diazo blueprint, since I was a little kid watching Wile E Coyote or Speed Racer cartoons. I'll try to resist buying the Model ≡ poster until after the final reveal/unveil in case it is a little different then.
 

TrevP

TOO Founder / Administrator
Founder
Joined
Mar 1, 2016
Messages
6,546
Location
Toronto
Tesla Owner
Model X
Country
Country
#14
I had a long discussion with Matt and Roger over breakfast discussing all things Tesla, Model 3 and accessories.

Both of them rode in the prototype and Roger was adamant that the interior was not finished and had a "cardboardy" (his words, not mine) quality to the interior suggesting it was only a placeholder. We're all in agreement in the fact that Tesla has a habit of showing prototypes with placeholder interiors that bear little resemblance to production interiors.

Both Matt and Roger we re VERY excited about Model 3 and were completely in love with the design saying pictures of the car does not do it justice, it's much more beautiful in person. His opinions expressed in his book about production numbers not being reached as stated are a bit more tempered now that production seems to still be on schedule but Roger still feels there's no way Tesla will produce 100K Model 3s by the end of this year. He said *maybe* half that. No bets were placed but we shall see the outcome :)

I spoke to them about your desires in the informal thread we had for accessories, they pretty much already have a list that encompasses all of them but I did make a case for them to offer a rebadging kit with "3" bars for the Model 3 and they're most likely going to do that for us :)

When the time comes we'll be working together to offer our members here some deals and specials on the products so stay tuned!
 

Red Sage

The Cybernetic Samurai
Joined
Dec 3, 2016
Messages
714
Location
Los Angeles CA
Country
Country
#15
Excellent. At the risk of potentially comitting a faux pas -- as would a Honda driver that uses those fake trio of plastic vents from a Buick on their car -- I would definitely get a set of the proper 'Model ≡' emblems for my car.



 

TrevP

TOO Founder / Administrator
Founder
Joined
Mar 1, 2016
Messages
6,546
Location
Toronto
Tesla Owner
Model X
Country
Country
#16
I'm not one for "carbon fibre" sticky things but the ones they had on the b pillars on their Model X looked nice. Probably would look nice on the Model 3 too so I volunteered to review those ;)

They're in the process of making new sets with camera cutouts for AP2 cars just in case anyone asks.