Page Mill 2- Piece OEM Size Rear Rotors

MountainPass

Top-Contributor
Joined
May 15, 2018
Messages
489
Location
Toronto, Ontario
Tesla Owner
Model 3
Country
Country
#1
Stay cool, look cool.

  • Stock sizing, perfect fit
  • Lightweight, visually stunning two piece rotor
  • Aluminum anodized hat made from US-Sourced 6061-T6
  • Optimal cooling, directional rotors with curved vanes
  • Made in the USA
  • Rotors made by a leading brake supplier with winning experience in the highest level of motorsport.
  • Significant weight reduction from the factory rotors.
We are producing the same beautiful design as our Page Mill 365mm Front Big Brake Kit, for the rear of the Model 3. These rotors are the same diameter and thickness as your stock rotors, but offer the benefits of a lightweight aluminum tophat and curved directional vanes for significantly improved cooling. As these rotors are the same diameter as factory, any wheels that fit with the OEM brakes will also fit with these rotors.
While the rear brakes are significantly less of an issue than the front brakes on the Model 3, the rears do get to the limit on the racetrack. The pad wear is extremely rapid at elevated temperatures, and so a curved vane disc with improved airflow goes a long way to improving rear pad life under aggressive driving and keeping the brakes inside of their thermal window. The slotted discs also help clean the pads, prevent glazing and ensure the pads are as consistent as possible.
These rotors install very quickly, any competent shop will be able to do this job quickly. The only caution is to be sure the parking brake is disabled so that it does not try to apply while the caliper is unbolted from the car.
We also highly recommend our Page Mill 365mm front brake kit to go along with these rear discs. You can see those rotors here: Page Mill 365mm Big Brake Kit

This kit includes the following:
  • (2) Rotor rings and rotor hats assembled and ready to be installed on the car. They are directional so be sure to install them on the correct side!
https://www.mountainpassperformance.com/product/mpp-page-mill-rear-rotors/








 
Last edited:

beastmode13

Well-Known Member
TOO Supporting Member
Joined
Aug 11, 2018
Messages
239
Location
Mountain View, CA
Tesla Owner
Model 3
Country
Country
#3
When will the P3D+ version be available for both front and back with street/track pads?
 
Last edited:

beastmode13

Well-Known Member
TOO Supporting Member
Joined
Aug 11, 2018
Messages
239
Location
Mountain View, CA
Tesla Owner
Model 3
Country
Country
#9
Yep, that's exactly what I measured!.
I don't think there is anything wrong with it being "thin", that's how it was designed:

Thanks for sharing this video, very informative. The hat is press formed steel, which is stronger than aluminum or cast iron thus the thinner dimension.