Model3 logo ... model/drawing

quadmasta

Active Member
Joined
Jul 24, 2018
Messages
151
Location
Atlanta, GA
Tesla Owner
Model 3
Country
Country
#1
I ordered some generic hexagonal cell rubber mats from ebay and was thinking of coming up with a little aluminum plate to rivet onto them that'd have Model 3 like the front door sill protectors do but I can't find an existing DXF/DWG of the logo. Before I go taking a bunch of pictures and re-drawing it myself does anyone know where I might find one?

Thanks,
Brian
 

quadmasta

Active Member
Joined
Jul 24, 2018
Messages
151
Location
Atlanta, GA
Tesla Owner
Model 3
Country
Country
#3
Tesla has them on their press kit site. There’s a link there to logon to their box account where you should find heir logos. Nothing in DXF format though so youlll have to convert them

https://www.tesla.com/en_CA/presskit
That's an excellent resource but no Model 3 logo yet :(

I'll probably end up taking my license plate frame off and scanning it and then tracing it.
 

quadmasta

Active Member
Joined
Jul 24, 2018
Messages
151
Location
Atlanta, GA
Tesla Owner
Model 3
Country
Country
#4
I ended up tracing a logo I found online and seeing how it'd look printed. Looks like my print area got a bit too hot toward the end but it's decent. I'll share the files if anyone wants them.